Rom-News-247.de
Linear Technology: Dual Output, High Power 60V Synchronous Boost Controller
Datum: Freitag, dem 22. Januar 2010 Thema: Rom Infos
MILPITAS, CA January 21, 2010 Linear Technology Corporation announces the
LTC3788/-1, a dual output, high power synchronous step-up switching DC/DC controller that replaces the boost diode with a high efficiency N-Channel MOSFET. This eliminates the heat sink normally required in medium to high power boost converters. The LTC3788/-1 can produce a 24V at 5A output with up to 97% efficiency, making it ideal for high power automotive audio amplifiers, industrial and medical applications where a step-up DC/DC converter must deliver high power with low heat dissipation in a small solution size.
The LTC3788/-1 operates from an input voltage ranging from 4.5V to 38V during
start-up, maintains operation down to 2.5V after start-up and can regulate an output voltage as high as 60V. The powerful 1.5Ohm onboard N-channel MOSFET gate drivers are capable of slewing large MOSFET gates quickly, minimizing transition losses and allowing for up to a 10A per channel output current. In addition, the LTC3788/-1 draws only 125ľA when one output is active and only 200ľA when both outputs are enabled.
The constant frequency current mode architecture allows for paralleled outputs. The LTC3788 includes a clock output, phase modulation (for multiphase applications), two separate power good outputs and an adjustable current limit. The LTC3788/-1 has a phase-lockable frequency from 75kHz to 850kHz or a selectable fixed frequency from 50kHz to 900kHz. It has adjustable cycle-by-cycle current limit protection and uses either a sense resistor or monitors the voltage drop across the inductor (DCR) for current sensing. In applications where the input voltage may sometimes exceed the regulated output voltage, the LTC3788/-1 is able to keep the synchronous MOSFET on continuously so that the output voltage follows the input voltage with minimal power loss. Furthermore, the LTC3788/-1 has adjustable soft-start and maintains ą1% reference voltage accuracy over an operating temperature range of -40°C to 125°C.
The LTC3788-1 is available in an SSOP-28 package and the LTC3788 is housed in a 32-lead 5mm x 5mm QFN. Both versions are available from stock. For more information, visit www.linear.com.
Summary of Features: LTC3788/-1
Up to 97% Efficiency
Eliminates Heat Sink in Medium to High Power Boost Converters
Up to 60V VOUT Operation
Wide VIN Ranging from 4.5V to 38V, Maintains Operation down to 2.5V After Start-Up
Powerful 1.5 Ohm Gate Drivers
100% Duty Cycle Capability for Synchronous MOSFET
Phase Lockable Frequency from 75kHz to 850kHz
Programmable Fixed Frequency from 50kHz to 900kHz
RSENSE or Inductor DCR Current Sensing
Current Mode Control
ą1% Reference Voltage Accuracy over -40oC to +125oC
Programmable Soft-Start
Phase Modulation
Power Good Outputs
MILPITAS, CA January 21, 2010 Linear Technology Corporation announces the
LTC3788/-1, a dual output, high power synchronous step-up switching DC/DC controller that replaces the boost diode with a high efficiency N-Channel MOSFET. This eliminates the heat sink normally required in medium to high power boost converters. The LTC3788/-1 can produce a 24V at 5A output with up to 97% efficiency, making it ideal for high power automotive audio amplifiers, industrial and medical applications where a step-up DC/DC converter must deliver high power with low heat dissipation in a small solution size.
The LTC3788/-1 operates from an input voltage ranging from 4.5V to 38V during
start-up, maintains operation down to 2.5V after start-up and can regulate an output voltage as high as 60V. The powerful 1.5Ohm onboard N-channel MOSFET gate drivers are capable of slewing large MOSFET gates quickly, minimizing transition losses and allowing for up to a 10A per channel output current. In addition, the LTC3788/-1 draws only 125ľA when one output is active and only 200ľA when both outputs are enabled.
The constant frequency current mode architecture allows for paralleled outputs. The LTC3788 includes a clock output, phase modulation (for multiphase applications), two separate power good outputs and an adjustable current limit. The LTC3788/-1 has a phase-lockable frequency from 75kHz to 850kHz or a selectable fixed frequency from 50kHz to 900kHz. It has adjustable cycle-by-cycle current limit protection and uses either a sense resistor or monitors the voltage drop across the inductor (DCR) for current sensing. In applications where the input voltage may sometimes exceed the regulated output voltage, the LTC3788/-1 is able to keep the synchronous MOSFET on continuously so that the output voltage follows the input voltage with minimal power loss. Furthermore, the LTC3788/-1 has adjustable soft-start and maintains ą1% reference voltage accuracy over an operating temperature range of -40°C to 125°C.
The LTC3788-1 is available in an SSOP-28 package and the LTC3788 is housed in a 32-lead 5mm x 5mm QFN. Both versions are available from stock. For more information, visit www.linear.com.
Summary of Features: LTC3788/-1
Up to 97% Efficiency
Eliminates Heat Sink in Medium to High Power Boost Converters
Up to 60V VOUT Operation
Wide VIN Ranging from 4.5V to 38V, Maintains Operation down to 2.5V After Start-Up
Powerful 1.5 Ohm Gate Drivers
100% Duty Cycle Capability for Synchronous MOSFET
Phase Lockable Frequency from 75kHz to 850kHz
Programmable Fixed Frequency from 50kHz to 900kHz
RSENSE or Inductor DCR Current Sensing
Current Mode Control
ą1% Reference Voltage Accuracy over -40oC to +125oC
Programmable Soft-Start
Phase Modulation
Power Good Outputs
|
|