Rom-News-247.de
Linear Technology: Isolated Monolithic Flyback Regulator
Datum: Dienstag, dem 03. August 2010
Thema: Rom Infos
MILPITAS, CA – August 2, 2010 – Linear Technology Corporation announces the LT3575, an isolated monolithic flyback switching regulator that significantly simplifies the design of an isolated DC/DC converter. No opto-isolator, third winding or signal transformer are required for feedback since the output voltage is sensed from the primary-side flyback signal. The LT3575 operates over a 3V to 40V input voltage range, has a 2.5A power switch and delivers up to 14 Watts of output power, making it well suited for a wide variety of industrial, medical, telecom, datacom and automotive applications.
The LT3575 operates in boundary mode, which is a variable frequency current-mode control switching scheme, typically resulting in +/-5% regulation over the full line, load and temperature range. Boundary mode also permits the use of a smaller transformer compared to equivalent continuous conduction-mode designs. The output voltage is easily set by two external resistors and the transformer turns ratio. Several off-the-shelf transformers, identified in the data sheet, can be used for numerous applications. The high level of integration and the use of boundary-mode operation results in a simple, clean application solution to the traditionally tough problem of isolated power delivery.
Additional features include an onboard low dropout regulator for IC power, programmable soft-start, undervoltage lockout, adjustable current limit and output voltage temperature compensation.
The LT3575 is available in a small thermally enhanced TSSOP-16 package and is offered in an extended and industrial operating junction temperature range from -40°C to 125°C. For more information, visit www.linear.com/3575.
Summary of Features: LT3575
• VIN Range from 3V to 40V
• Onboard 2.5A, 60V Integrated Power Switch
• No Transformer, Third Winding or Opto-Isolator Required for Feedback
• Current-Mode Control
• Boundary-Mode Operation
• VOUT Set with Two External Resistors
• Off-the-Shelf Transformers
• Programmable Soft-Start
• Programmable Undervoltage Lockout
• Output Voltage Temperature Compensation
• Adjustable Current Limit
Veröffentlicht von >> xmedia << auf Freie-PresseMitteilungen.de
MILPITAS, CA – August 2, 2010 – Linear Technology Corporation announces the LT3575, an isolated monolithic flyback switching regulator that significantly simplifies the design of an isolated DC/DC converter. No opto-isolator, third winding or signal transformer are required for feedback since the output voltage is sensed from the primary-side flyback signal. The LT3575 operates over a 3V to 40V input voltage range, has a 2.5A power switch and delivers up to 14 Watts of output power, making it well suited for a wide variety of industrial, medical, telecom, datacom and automotive applications.
The LT3575 operates in boundary mode, which is a variable frequency current-mode control switching scheme, typically resulting in +/-5% regulation over the full line, load and temperature range. Boundary mode also permits the use of a smaller transformer compared to equivalent continuous conduction-mode designs. The output voltage is easily set by two external resistors and the transformer turns ratio. Several off-the-shelf transformers, identified in the data sheet, can be used for numerous applications. The high level of integration and the use of boundary-mode operation results in a simple, clean application solution to the traditionally tough problem of isolated power delivery.
Additional features include an onboard low dropout regulator for IC power, programmable soft-start, undervoltage lockout, adjustable current limit and output voltage temperature compensation.
The LT3575 is available in a small thermally enhanced TSSOP-16 package and is offered in an extended and industrial operating junction temperature range from -40°C to 125°C. For more information, visit www.linear.com/3575.
Summary of Features: LT3575
• VIN Range from 3V to 40V
• Onboard 2.5A, 60V Integrated Power Switch
• No Transformer, Third Winding or Opto-Isolator Required for Feedback
• Current-Mode Control
• Boundary-Mode Operation
• VOUT Set with Two External Resistors
• Off-the-Shelf Transformers
• Programmable Soft-Start
• Programmable Undervoltage Lockout
• Output Voltage Temperature Compensation
• Adjustable Current Limit
Veröffentlicht von >> xmedia << auf Freie-PresseMitteilungen.de
|
|